Sand is manufactured from ‘Grit’, which is by product of stone crusher. While crushing, the size below 6mm is manufactured, which is sieved and separated from the metal. It is not used much in the construction industries. The consumption of the “grit” is very less compared to the production. Hence, it is available at very cheap rate. The sand plant is specially designed for manufacturing sand from the grit. It is a better utilization of the material.
We should depend on the different materials to choose the different sand making machine, now we teach you how to choose the suitable sand making machine.
One of the four major series: PXJ fine machine (the third sand making machine)
The recommendation reasons: investments reduce 40%, the efficiency will beigher 35%-50%
The product has the following three advantages:
1, feeding large size grain: from 120 mm-200 mm.
2, high-yield: the 5 mm finished product is above 85%.
3, save power: sand sand machine of finished 50 T product with power of 45-kw.
production capacity: 20 T-200 T an hour.
The no.2: DPC single setpoint fine machine (the fourth sand making machine)
The recommendation reasons: suitable for large materials
The product has the following five advantages:
1, feeding large size grain: from 900 mm- -200 mm
2, high yield. the finishedproduct below 5mmis above 80%.
3, electricity saving is more than 40%.
4, improving 30% utilization rate of the hammer.
5, reducing 50% an area.
Production capacity: 30-600 T an hour. To a service-oriented brand integrity,As the professional manufacturer of complete sets of mining machinery, like dryer machine, Henan Hongxing is always doing the best in products and service.limestone dryer:http://www.hxjq-crusher.com/21.html
The no.3: PCL vertical non-clog compound breakage sand making machine
The recommendation reasons: suitable for high water content, high mud content .
The product has a feature of big crushing ratio, Lower cost. Especially it is suitable for the raw material of brick and has fine users all over the world.
Production capacity: 10-130 T an hour.
The raw material is transferred to jaw crusher for primary crushing by vibrating feeder, then the crushed materials are transferred to sand-making machine through belt conveyor for secondary crushing. The materials crushed will be transferred to the vibrating screen. The materials with suitable size will be transferred to sand washing machine, after being washed, then clean final products will be discharged. The others with unsuitable size will be screened from vibrating screen, then will be transferred to the sand-making machine, this forms a closed circuit manifold cycles.Sizes of final products will be according to our customers’ requirements. If it is the dry process, the classifier and deduster will be attached according to you requirement.Characteristics of Sand production line:It is highly automatic. The efficiency is high, operation cost is low, crushing ratio is high, capacity is high, and pollution is very low. Size of final product is even, and with good shape, which complies with requirement for highway.In order to minimum occupation area, we try to make full use of space. Advanced electric control system makes the full line very smooth, reliable, and easy to maintenance.